ProSoft Technology ILX69-PBM - Manual (Page 10)

Contents ILX69-PBM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS Master Communication Module
Page 10 of 124 ProSoft Technology, Inc.
February 4, 2015
1.5.2 System Requirements
ProSoft fdt Configuration Manager software
 PC with 1 GHz processor or higher
 Windows
®
7 (32 bit) SP1, Windows
®
7 (64 bit) SP1, Windows
®
XP (32 bit) SP3
 Administrator privilege required for installation
 Internet Explorer 5.5 or higher
 The software Microsoft .NET Framework 3.5 or 4.0 (Included in the ProSoft fdt
Configuration Manager installation package)
 Free disk space: minimum 400 MB
 DVD ROM drive
 RAM: minimum 512 MB, recommended 1024 MB
 Graphic resolution: minimum 1024 x 768 pixel
 Keyboard and Mouse
Note: If the solution file is saved and opened again, or if the solution file is
used on another PC, the system requirements must match. Particularly,
the DTM must be installed on the used PC.
Restrictions
 Touch screen is not supported.
 When ProSoft fdt Configuration Manager is installed on a PC, Hilscher standard
SYCON.net and legacy PROSOFT.fdt cannot be and shall not be installed, and vice-
versa.
1.5.3 Hardware Requirements
The following minimum hardware is required to use the ILX69-PBM:
 Windows PC for the ProSoft fdt Configuration Manager software (advantageous with SD
card slot or SD card reader). Refer to section System Requirements (page 10).
 Ethernet cable for ProSoft fdt Configuration Manager or ILX69-PBM web page
connection.
CompactLogix System
 Personal Computer
 1769
– Programmable controller (1769-L23, 1769-L32E and 1769-L36ERM)
 1769 – Power supply
 1769 – Right or left termination end cap
 Ethernet cable for interface to the 1769 programmable controller.