ProSoft Technology ILX69-PBM - Manual (Page 40)

Contents ILX69-PBM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS Master Communication Module
Page 40 of 124 ProSoft Technology, Inc.
February 4, 2015
5.2.3 PROFIBUS Slave Configuration
The ProSoft fdt Configuration Manager comes pre-loaded with various PROFIBUS DPV0
and DPV1 slave GSD profiles. You can search them by F
IELDBUS or V ENDOR tabs at the
bottom of the slave list pane.
If you do not see your slave(s) listed, you will need to import them into the software.
Importing a slave profile into the ProSoft fdt Configuration Manager
Importing a slave to the ProSoft fdt Configuration Manager depends on the configuration
method of the slave. It is done by importing the PROFIBUS GSD file (typical) or using the
FDT/DTM technology.
Slave with DTM Technology
If the slave is configured by DTM technology, install the DTM software on your PC that was
delivered with the slave. Then reload the Device Catalog in ProSoft fdt Configuration
Manager.