ProSoft Technology ILX69-PBM - Manual (Page 44)

Contents ILX69-PBM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS Master Communication Module
Page 44 of 124 ProSoft Technology, Inc.
February 4, 2015
Editing the Slave Address
Assigning and editing a slave address is done in the ILX69-PBM configuration window.
1 Double-click on the ILX69_PBM icon in the Network pane.
2 This opens the netDevice – Configuration ILX69_PBM<x> window.
3 In the C ONFIGURATION > S TATION T ABLE selection, edit the slave’s address under the
Station Address parameter.
4 When complete, click A PPLY , then OK.
5 Save the project.