ProSoft Technology ILX69-PBM - Manual (Page 9)

ILX69-PBM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Master Communication Module User Manual
ProSoft Technology, Inc. Page 9 of 124
February 4, 2015
1.4 1769 Programmable Controller Functionality
PROFIBUS DP supports acyclic services through messages. These PROFIBUS DP
services are supported by the Studio 5000 programming tool using CIP messages. Not all of
the 1769 programmable controllers support CIP messaging.
The basic PROFIBUS DP acyclic services Global Control or slave Diagnostics request are
also executable in addition to the CIP method by using the I/O area. The following table
displays the 1769 programmable controllers and the functionalities they support.
CompactLogix System
Processor I/O (cyclic)
CIP
Messaging
(acyclic)
CompactLogix™ 1769-L23 Yes Yes
CompactLogix™ 1769-L30 Yes No
CompactLogix™ 1769-L31 Yes Yes
CompactLogix™ 1769-L32E Yes Yes
CompactLogix™ 1769-L35E Yes Yes
CompactLogix™ 1769-L36ERM Yes Yes
Yes = Functionality supported
No = Functionality not supported
1.5 Requirements
1.5.1 Software Requirements
The software requirements for using the ILX69-
PBM within a CompactLogix™ system are
listed below. You must have the following software installed on your PC unless otherwise
noted:
CompactLogix System
 Studio 5000 programming software, V21.00 or higher

RSLogix™ 5000 programming software, V20.00 or higher
ProSoft Configuration Software
 ProSoft fdt Configuration Manager for Rockwell Interfaces V1.0.x.x or higher