Disposal of electronic equipment waste, References – ProSoft Technology ILX69-PBM User Manual
Page 117
ILX69-PBM ♦ CompactLogix or MicroLogix Platform
Contents
PROFIBUS Master Communication Module
User Manual
ProSoft Technology, Inc.
Page 117 of 124
February 4, 2015
Start/Stop Communication
PROFIBUS communications can be started/stopped by using the "NRDY" (NotReady) Bit.
When this bit is set, the communication between the ILX69-PBM and all slaves is stopped.
All slaves will clear their outputs and the ILX69-PBM will be in stop mode. This control bit
allows the user program to make a controlled start of the communication with the
PROFIBUS network.
9.2
Disposal of Electronic Equipment Waste
As a consumer, you are legally obliged to dispose of all electronic equipment waste
according to national and local regulations.
Waste Electronic Equipment
This product must not be treated as household waste.
This product must be disposed of at a designated waste electronic equipment
collecting point.
9.3
References
[1]
PROFIBUS DP Master Protocol API Manual, Revision 19, Hilscher GmbH 2013
[2]
PROFIBUS DP Slave Protocol API Manual, Revision 15, Hilscher GmbH 2013