ProSoft Technology MVI56E-DNPNET - Manual (Page 11)

MVI56E-DNPNET ♦ ControlLogix Platform Contents
DNPNET Ethernet Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 11 of 140
February 13, 2015
Important: Before beginning the installation, please verify that all of the following items are present.
Qty. Part Name Part Number Part Description
1 MVI56E-DNPNET
Module
MVI56E-DNPNET DNPNET Ethernet Client/Server
Communication Module
1 Ethernet Cable RL-CBL025 Ethernet Straight-Through Cable
1 ProSoft Solutions
DVD
DVD-001 Contains the ProSoft Configuration Builder
(PCB) software.
Files can also be found at
http://www.prosoft-technology.com
If any of these components are missing, please contact ProSoft Technology Technical
Support for replacement parts. If the DVD is not present, please visit
http://www.prosoft-technology.com for the latest files.
1.4 Setting Jumpers
The Setup Jumper acts as "write protection" for the module’s flash memory. In "write
protected" mode, the Setup pins are not connected, and the module’s firmware cannot be
overwritten. The module is shipped with the Setup jumper OFF. Do not jumper the Setup
pins together unless you are directed to do so by ProSoft Technical Support (or to update
the module firmware).
The following illustration shows the MVI56E-DNPNET jumper configuration with the Setup
Jumper OFF.