ProSoft Technology MVI56E-DNPNET User Manual
Page 28
Advertising
Contents
MVI56E-DNPNET ♦ ControlLogix Platform
User Manual
DNPNET Ethernet Client/Server Communication Module
Page 28 of 140
ProSoft Technology, Inc.
February 13, 2015
Note:
If the auto-configuration procedure fails, verify that the cables are connected correctly between the
processor and the serial port on your computer, and then try again. If you are still unable to auto-configure the
port, refer to your RSLinx documentation for further troubleshooting steps.
Advertising