ProSoft Technology MVI56E-DNPNET - Manual (Page 35)

MVI56E-DNPNET ♦ ControlLogix Platform Contents
DNPNET Ethernet Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 35 of 140
February 13, 2015
Tag Name Range Description
DNPNET.CONFIG.DNP3_Whit
eList[0].a
1 to 254 IP Address Octet A
DNPNET.CONFIG.DNP3_Whit
eList[0].b
0 to 254 IP Address Octet B
DNPNET.CONFIG.DNP3_Whit
eList[0].c
0 to 254 IP Address Octet C
DNPNET.CONFIG.DNP3_Whit
eList[0].d
1 to 254 IP Address Octet D
DNPNET.CONFIG.DNP3_Whit
eList[1].a
DNPNET.CONFIG.DNP3_Whit
eList[1].b
DNPNET.CONFIG.DNP3_Whit
eList[1].c
DNPNET.CONFIG.DNP3_Whit
eList[1].d
… … …
DNPNET.CONFIG.DNP3_Whit
eList[9].a
DNPNET.CONFIG.DNP3_Whit
eList[9].b
DNPNET.CONFIG.DNP3_Whit
eList[9].c
DNPNET.CONFIG.DNP3_Whit
eList[9].d
2.3.5 DNPNET.CONFIG.DNP3_Client
Configures the MVI56E-DNPNET client.
Tag Name Range Description
DNPNET.CONFIG.DNP3_Clie
nt.Internal_ID
0 to 32767 This is the DNP address for the module. All
messages with this address from the client will
be processed by the module.
DNPNET.CONFIG.DNP3_Clie
nt.Event_Messages_to_PLC
0 or 1 This parameter determines if event messages
received on the client port will be sent to the
processor. If this option is utilized, ladder logic
must be written to handle the 9903 blocks
generated by the module.
DNPNET.CONFIG.DNP3_Clie
nt.Initialize_IED_Input_Databa
se
0 or 1 This parameter determines if the module will
request data from the processor to initialize the
IED database input data areas. If this option is
utilized, ladder logic is required to send the
requested blocks from the processor to the
module.