ProSoft Technology MVI56E-DNPNET - Manual (Page 53)

MVI56E-DNPNET ♦ ControlLogix Platform Contents
DNPNET Ethernet Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 53 of 140
February 13, 2015
5
Click CIP
P ATH E DIT
to open the
CIPconnect Path Editor
dialog box.
The CIPconnect Path Editor allows you to define the path between the PC and the MVI56E-
DNPNET module. The first connection from the PC is always a 1756-ENBT (Ethernet/IP)
module.
Each row corresponds to a physical rack in the CIP path.

If the MVI56E-DNPNET module is located in the same rack as the first 1756-ENBT
module, select
R ACK N O . 1
and configure the associated parameters.
 If the MVI56E-DNPNET is available in a remote rack (accessible through ControlNet or
Ethernet/IP), include all racks (by using the A
DD R ACK
button).
Parameter Description
Source Module Source module type. This field is automatically selected
depending on the destination module of the last rack (1756-
CNB or 1756-ENBT).
Source Module IP Address IP address of the source module (only applicable for 1756-
ENBT)
Source Module Node Address Node address of the source module (only applicable for 1756-
CNB)
Destination Module Select the destination module associated to the source module
in the rack. The connection between the source and destination
modules is performed through the backplane.
Destination Module Slot Number The slot number where the destination MVI56E module is
located.
To use the CIPconnect Path Editor, follow these steps.