ProSoft Technology MVI56E-DNPNET - Manual (Page 93)

MVI56E-DNPNET ♦ ControlLogix Platform Contents
DNPNET Ethernet Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 93 of 140
February 13, 2015
4 Point Number This field contains the point number in the remote IED unit for
the event message.
5 Object This field contains the object code for the point and event.
6 Variation This field contains the variation code for the point and event.
7 Reserved Reserved for future use
8 to 9 Low Time This field contains the least-significant double word of the 64-
bit UTC time for the event.
10 to 11 High Time This field contains the most- significant double word of the 64-
bit UTC time for the event.
12 to 13 DINT Value This field contains the double integer value for the point
associated with the event message.
14 to 15 REAL Value This field contains the double float point value for the point
associated with the event message.
Block 9904: Auxiliary Client Commands Block
Block identification code 9904 is used to place up to 24 Auxiliary Commands in the
command queue.
Word Offset
in Block Data Field(s) Description
0 Block ID This field contains the block identification code of 9904 for the
block.
1 Command Count This field defines the number of commands contained in the
block. The valid range for the field is 1 to 24.
2 to 11 Command #1 Data for command.
12 to 21 Command #2 Data for command.
... … …
232 to 241 Command #24 Data for command.
242 to 247 Reserved Reserved for future use
The format of each message in the block is shown in the following table.
Word Offset Definitions Description
0 Port_Flag Clear 3rd bit to disable. Set 5th bit to select IED DB for write
functions
1 Server_Address Address of server command is sent to
2 Object Object number
3 Variation Variation number
4 Function Function number
5 Point_Number_In
_Server
Starting point in server
6 Point count Number of points in server