ProSoft Technology MVI56E-DNPNET User Manual
Page 64
Contents
MVI56E-DNPNET ♦ ControlLogix Platform
User Manual
DNPNET Ethernet Client/Server Communication Module
Page 64 of 140
ProSoft Technology, Inc.
February 13, 2015
5
If the Test Connection is successful, click C
ONNECT
to display the Diagnostics menu in
the Diagnostics Window.
If PCB is unable to connect to the module:
1
Click the
B
ROWSE
D
EVICE
(
S
)
button to open the ProSoft Discovery Service. Select the
module, then right-click and choose S
ELECT FOR
PCB
.
2
Close ProSoft Discovery Service, and click the C
ONNECT
button again.
3
If these troubleshooting steps fail, verify that the Ethernet cable is connected properly
between your computer and the module, either through a hub or switch (using the grey
cable) or directly between your computer and the module (using the red cable).
If you are still not able to establish a connection, contact ProSoft Technology for assistance.