Adjusting color uniformity – Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual
Page 158
Advertising
158
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Management menu of
each projector. (The color tone may not be uniform even after performing color uniformity.)
Note:
Set the
Color Mode
setting in each projector's Image menu to
Multi-Projection
before you start
projecting.
1.
Press the
Menu
button on the remote or control panel, select the
Management
menu, and press
Enter
.
2.
Select the
Color Uniformity
setting and press
Enter
.
3.
Select
On
as the
Color Uniformity
setting and press
Enter
, then press
Esc
.
4.
Select
Adjustment Level
and press
Enter
.
5.
Select an adjustment level and press
Esc
.
6.
Select
Start Adjustments
and press
Enter
.
Advertising