Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual
Page 97
97
2.
Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the laser turns off, and the Status light turns off.
Note:
If the
Light Source Calibration
setting is set to
Run Periodically
in the projector's
Management menu, light source calibration starts automatically if you turn off the projector and the
following conditions are present:
• 100 hours have passed since the last light source calibration.
• You have used the projector continuously for at least 20 minutes.
3.
To transport or store the projector, make sure the power light is blue (not flashing) and the Status
light is off, then unplug the power cord.
Caution:
To avoid damaging the projector or laser, never unplug the power cord when the Status
light is on or flashing.
Parent topic:
Using Basic Projector Features
Related references