Transferring settings from a computer – Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual
Page 191
191
Transferring Settings from a Computer
After saving projector settings to a computer, you can transfer them to another projector of the same
model.
Your computer must be running one of the following operating systems:
• Windows 7
• Windows 8.x
• Windows 10
• OS X 10.11.x
• macOS 10.12.x
• macOS 10.13.x
• macOS 10.14.x
• macOS 10.15.x
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1.
Turn off the projector and unplug the power cord from the projector's power inlet.
2.
Connect a USB cable to your projector's
USB-B
port.
3.
Connect the other end to any available USB port on your computer.
4.
Press and hold the
Menu
button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
5.
When the power and Status lights are blue, and the Laser and Temp lights are orange, release the
Menu
button.