Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) - Manual (Page 206)

206
Setting Options Description
Volume Varying levels available Adjusts the volume of the projector's
speaker system or external speakers
Source Signal Format
Overscan
EDID
HDMI Out Intensity
Displays settings selected for the current
input source
Signal Format : sets the signal type and
video range for certain input sources
• Video Signal : specifies the signal type
from input sources connected to video
ports; if interference appears or no
image appears when set to
Auto ,
select the appropriate signal type
• Video Range : sets the video range to
match the setting of an input source
connected to the HDMI ports or
HDBaseT port
Overscan : changes the projected image
ratio to make the edges visible by a
selectable percentage or automatically
when projecting a component signal
EDID : describes the display capabilities
of your projector; change this setting as
necessary according to the resolution of
the current input source (you can select
EDID settings for individual input sources
without having to change the input
source)
HDMI Out Intensity : adjusts the signal
intensity input from the HDMI Out port;
change this setting when you cannot
display the image output from the
HDMI
Out port correctly