Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual
Page 54
54
5.
Select
Projector Name
and enter a name up to 16 alphanumeric characters long to identify the
projector on a network.
6.
Set the
Priority Control Interface
setting to
Wired LAN
.
7.
Select the
Wired LAN
menu and press
Enter
.
8.
Select
IP Settings
and press
Enter
.
9.
Select your IP settings as necessary:
• If your network assigns addresses automatically, turn on the
DHCP
setting.
• If you must set addresses manually, turn off
DHCP
and enter the projector's
IP Address
,
Subnet
Mask
, and
Gateway Address
as needed.
Note:
To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press
Enter
. Alternatively, press and hold the
Num
button on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off
IP Address Display
in the
Wired LAN menu.
11. Select
Return
and press
Enter
to return to the Network Settings menu.
12. Select
Network Projection
and press
Enter
.
You see a screen like this:
13. Turn on the
Projector Keyword
setting if you want to prevent access to the projector by anyone not
in the room with it.