Solutions when a battery message appears, Solving network problems, Solutions when wireless authentication fails – Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual
Page 269
269
Solutions When a Battery Message Appears
If you see a message telling you that the battery that saves your clock settings is running low, contact
Epson for help.
Parent topic:
Solving Projector or Remote Control Operation Problems
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Solving Network Problems
Check the solutions in these sections if you have problems using the projector on a network.
Solutions When Wireless Authentication Fails
Solutions When You Cannot Access the Projector Through the Web
Solutions When Network Alert E-Mails are Not Received
Solutions When the Image Contains Static During Network Projection
Solutions When You Cannot Connect Using Screen Mirroring
Solutions When the Image or Sound Contains Static When Using Screen Mirroring
Solutions When the Projected Screen is not Shared Correctly
Parent topic:
Solutions When Wireless Authentication Fails
If you cannot authenticate a wireless connection, try the following solutions:
• If the wireless settings are correct, but authentication fails, you may need to update the
Date & Time
settings in the Management menu, if available.
• Make sure the
Wireless LAN Power
setting is set to
On
.
• Check the
Security
settings and passphrase in the Network menu.
• Make sure the connected device is on and operating properly.
• Make sure you are using the correct Epson wireless LAN module.
• If the access point security is WPA3-EAP, change the access point setting to
WPA2/WPA3-EAP
.
Parent topic:
Related references