Saving a scheduled event – Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual
Page 193
193
Parent topic:
Related tasks
Selecting Password Security Types
Setting a Password
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Note:
Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source
Calibration events to occur only after 100 hours of usage.
Note:
The
Schedule
setting in the Menu Protection menu must be turned off to schedule an event.
1.
Set the date and time in the
Management
menu.
2.
Press the
Menu
button.
3.
Select the
Management
menu and press
Enter
.
4.
Select the
Schedule Settings
setting and press
Enter
.
5.
Select the
Schedule
menu and press
Enter
.
6.
Select
Add New
and press
Enter
.