Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) - Manual (Page 209)

209
Setting Options Description
HDBaseT Connect ELPHD02
Control Communications
Extron XTP
Connect ELPHD02 : set to On to use the
optional HDBaseT control pad. Make
sure this setting is disabled if you are not
using an HDBaseT control pad.
Control Communications : enables or
disables communication from the
Ethernet and serial ports on the
transmitter; turning on this setting
disables the projector's
LAN and RS-
232C ports ( Connect ELPHD02 and
Extron XTP must be turned off to use
this setting)
Extron XTP : set to On when you connect
an Extron XTP transmitter or switcher to
the
HDBaseT port
HDMI EQ Setting 1
2
3
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
occurs, such as no image being
projected, change the setting.
Reset Signal I/O Settings Resets all settings on the Signal I/O
menu to their default values
Parent topic: Adjusting the Menu Settings
Installation Settings - Installation Menu
Settings on the Installation menu let you set up your projector for your installation environment. The
available settings depend on the currently selected input source and other settings.