Atlas Sound Atmosphere C-ZSV Zone, Source, and Volume Wall Controller (Black) - Manual (Page 21)

Atmosphere
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
[email protected]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 21 –
Equalizer
1. Equalizers allow raising or lowering the level of individual frequencies or ranges (bands) of frequencies to improve the overall sound of a source
signal. Narrow bands can also be set to remove problems, like feedback or an acoustically induced low end.
2. EQ Enable/Bypass in real-time; Adjustable frequency and Q controls for each band.
3. Enable/Disable Filter by band and chose filter type selections:
• Band 1 types include:
1. PEQ
2. Low Shelf
3. High Shelf
4. Notch
5. High Pass Presets: BW6 HP,
BW12 HP, BW24 HP
• Band 2 & 3 types include:
1. PEQ
2. Low Shelf
3. High Shelf
4. Notch
• Band 4 types include:
1. PEQ
2. Low Shelf
3. High Shelf
4. Notch
5. Low Pass Presets: BW6 LP,
BW12 LP, BW24 LP
4. Dynamic fully adjustable bands on graphic display.
5. Select Presets to open a pop-up with four memory spots for EQ settings, A-B-C-D; name and store your favorite EQ settings from one channel,
then recall (copy) it to another channel.
6. Flatten All – resets EQ filters to baseline 0dB from 20Hz to 20KHz.
Preset Popup Window
4 spots, A, B, C, D to name
and save settings for your
own Presets
Recall presets
to this channel