Atlas Sound Atmosphere C-ZSV Zone, Source, and Volume Wall Controller (Black) - Manual (Page 57)

Atmosphere
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
[email protected]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 57 –
General Settings Page for C-V
1. The General Settings page shows the connected port, with settings pages for Zone Audio Control, and Light Ring.
2. Accessory Name – displays the editable name for this accessory.
3. Connected port ID, and location of the accessory on the port wiring bus (Port C-position 2).
4. Import Settings – allows a saved configuration file to be imported to duplicate an existing setup.
5. Export Settings – saves the configuration file as a backup or to use for importing.
6. Reset Settings – allows selecting between: Reset to default values or Reset parameters and reboot accessory.
7.
The locate icon can be clicked on or off causing the connected device to flash to physically identify its location. If left on, it will automatically
shut off after 30 minutes or will cancel when the controller encoder is used.
8. In addition to the wired wall controller a virtual controller is automatically created that emulates the settings by scanning the QR code. There are
various ways to use the QR codes: Copy Link, Open in New Window, or Print the QR code for display in the GEM mounting frame.