Atlas Sound Atmosphere C-ZSV Zone, Source, and Volume Wall Controller (Black) - Manual (Page 27)

Atmosphere
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
[email protected]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 27 –
Mixes
1. The “Mixes” source provides four separate Mix Channels each allowing a selection of any source inputs to be combined into a sub-mix channel with a
single audio master fader adjustment.
2. Select ADD MIX to add and configure a Mix Channel.
1. Each Mix can be named here and will be available to any zone by selecting from the zone inputs source lists.
2. Select input sources for Mix 1 channel.
3. The “X” deletes the mix and is only available in mix settings. Input level adjust – move fader or enter in dB level desired in window. When signal is
present, fader animates as a pre-fader peak meter and shows: Green = signal activity, Red = clipping. Note: Pay close attention to gain structure when
combining several sources.
Input Mix Page
1. Each Mix channel has a “Show Sources” options. When selected it drops down each source and fader for mixing, when done, “Hide Sources”
retracts sources and only displays the master mix fader.
2. This “>” icon opens the settings page to select or un-select sources to include in group mix.
3. Mix each level to desired group mix.
4. Mute – select to mute input channel.
5. Set level of master mix (Mix 1) to output (each of the 4 Mix channels appear in the source list in zone outputs).