Atlas Sound Atmosphere C-ZSV Zone, Source, and Volume Wall Controller (Black) - Manual (Page 29)

Atmosphere
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
[email protected]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 29 –
Zone – Mono - General Settings Page
1. The General Settings page shows the port to wire connection to, and DSP settings pages for Priority, Crossover, Equalizer, Ambient Noise Compensa-
tion (ANC) Control, and Limiter.
2. Speaker Preset – select from a list of AtlasIED speakers and load output preset EQ tuning for that specific speaker.
3. Gain Offset adjust with -20dB to + 20dB.
4. Delay adjustment from 0 to 100ms with enable/bypass- typically used to sync sound when speakers are located far away and at different distances
from target audience.
5. The “X” icon will delete the zone.
Zone – Stereo + Sub - General Settings Page
1. When a Stereo or Stereo + Sub Type is selected, the General Settings page shows the ports to wire connection to and DSP settings pages for Priority,
Crossover, Equalizer, Ambient Noise Compensation (ANC) Control, and Limiter. Each DSP page, where appropriate, adjusts the Left and Right channel
as a single pair referred to as “Main” and the “Sub” is displayed for adjustment separately. A mono source will be split across the zone speakers.
Stereo sources, with a Left and Right source, will remain stereo.
2. Speaker Preset – select from a list of AtlasIED speakers and load output preset EQ tuning for that specific speaker.
3. Gain Offset = -20dB to + 20dB, allows balancing the levels relative to the primary zone level out.
4. Delay adjustment from 0 to 500ms with enable/bypass- typically used to sync sound when speakers are located far away and at different distances
from target audience.
5. The “X” icon will delete the zone.