Panasonic TH-65SQ1WA 65" Class 4K HDR Commercial Monitor - Manual (Page 18)

18
English
Eyebolt
75-inch model
98-inch model 86-inch model
The display has holes for attaching eyebolts (M10).
When installing, use them to suspend the display.
Use the eyebolt only for temporary suspension or
movement for installation. This cannot be used for
permanent hanging installation.
Eyebolt (commercially available) mounting positions
1 When attaching the eyebolt, remove
the eyebolt cap from the eyebolt
mounting position (two locations),
and leave the flat washer (black) as it
is.
Eyebolt cap
Flat washer (black)
2 Attach the eyebolt with the flat washer
(black) left as it is.
Eyebolt
Flat washer (black)
3 After removing the eyebolt, tighten
the eyebolt cap with the flat washer
(black) left as it is.
Eyebolt cap
Flat washer (black)
Note
● Installation should be performed by an installation
professional.
● Do not suspend using only 1 eyebolt.
● Use commercially sold M10 eyebolts with a shank
length of 12 mm to 40 mm that satisfies the load
condition of product quality.
● Use ISO 3266 standard eyebolts. Also use ISO
standard members (wire, etc.) for hanging.
● The hanging angle should be 60° or more.
● After installation, remove the eyebolts, and close the
holes using the eyebolt caps removed when attaching
the eyebolts.
12 mm to
40 mm
φ 41 mm
or less
60° or more