Panasonic TH-65SQ1WA 65" Class 4K HDR Commercial Monitor - Manual (Page 37)

37
English
Selecting the input signal
Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
Unit
MENU ENTER INPUT + -
Switches input every time the buttons are pressed.
PC
Full
[HDMI1 ] → [ HDMI2 ] → [ DisplayPort ] →
[DIGITAL LINK ] → [DVI-D ] (or [SLOT ]) → [ PC ] →
[Screen Transfer ] → [ USB ] → [MEMORY VIEWER ]
[HDMI1]: HDMI 1 terminal, HDMI input
[HDMI2]: HDMI 2 terminal, HDMI input
[DisplayPort]: DisplayPort IN terminal, DisplayPort
input
[DIGITAL LINK]: DIGITAL LINK terminal, DIGITAL LINK
input
[DVI-D] * : DVI-D IN terminal, DVI-D input
[SLOT] * : Input signal of the function board
[PC]: PC IN terminal, PC input
[Screen Transfer]: Input that displays images transmitted
via network using “Screen Transfer”, a
dedicated application by Panasonic
[USB]: USB terminal, USB input
[MEMORY VIEWER]: USB terminal, “Memory viewer”
input
* : For [DVI-D] and [SLOT] input, either one selected for
the [DVI-D/SLOT select] setting is displayed. (see
page 90)
Note
● Displays the signal name as set in [Input label]. (see
page 69)
● Input will not be switched unless [Input lock] is set to
[Off]. (see page 74)
● Image retention may occur on the LCD liquid crystal
panel when a still picture is kept on the panel for
an extended period. To prevent such a problem,
using the screensaver and the [Wobbling] function is
recommended. (see page 68, 69)
● Switching to another input while the unit is connected
to Screen Transfer with Screen Transfer input will
break the connection. Check the connection again
after switching the input.
● For 98 and 86 inch models, [Screen Transfer] is
displayed only when the main software version is
4.0000 or later.