Panasonic TH-65SQ1WA 65" Class 4K HDR Commercial Monitor - Manual (Page 85)

85
English
[Multi display switching]
● Pressing the numeric button will enter the multi
display mode (multi input display, multi screen
display). (see page 55)
[Display ID / Display name]
● Pressing the numeric button enlarges [Display
ID] and [Display name].
[HDMI-CEC operation]
● Press the numeric buttons to display the
operation screen of the HDMI-CEC compatible
device.
[Playlist edit]
● Pressing the numeric button displays [Playlist
edit] screen. (see page 118)
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
98-inch model 86-inch model
[Input]
[Memory
load]
[Shortcut]
1 HDMI1 MEMORY1 [Signal]
2 DisplayPort MEMORY2 [Set up timer]
3 DIGITAL LINK MEMORY3
[Network
settings]
4 DVI-D MEMORY4
[Multi display
switching]
5 USB MEMORY5 [AV mute]
6
MEMORY
VIEWER
MEMORY6
[HDMI-CEC
operation]
75-inch model 65-inch model 55-inch model
49-inch model
[Input]
[Memory
load]
[Shortcut]
1 HDMI1 MEMORY1 [Signal]
2 DisplayPort MEMORY2 [Set up timer]
3 DIGITAL LINK MEMORY3
[Network
settings]
4
Screen
Transfer
MEMORY4 [Digital zoom]
5 USB MEMORY5 [AV mute]
6
MEMORY
VIEWER
MEMORY6
[HDMI-CEC
operation]
■
[Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
● When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
■
To use shortcut (numeric buttons)
1 Press <FUNCTION > or <1> ‒ <6>.
[Function button guide] will be displayed.
[Function button guide]: When [Off] is set, pressing
the numeric button starts operation.
Example: Input
1.
2.
3.
4.
5.
6.
Input
HDMI1
DisplayPort
DIGITAL LINK
DVI-D
USB
MEMORY VIEWER
2 Press <FUNCTION> to switch function
group.
Example: Memory load
1.
2.
3.
4.
5.
6. MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
Memory load
3 Press <1> ‒ <6>.
The function for the pressed button starts to operate.
Example: When <2> is pressed.
Memory load
Load from “MEMORY2”
Ok Cancel