Gilson 402 - Manual (Page 10)

Safety-2
Safety
This instrument 1 must not be sterilized, using an
autoclave, or any other mechanical device. When
you need to clean an instrument, use one of the
three following methods:
1 - a clean dry cloth,
2 - a cloth dampened with water,
3 - a cloth dampened with soapy water.
If a cloth dampened with soapy water is used to clean
the instrument, only domestic soap may be used.
No other form of detergent or chemical may be
used.
These electronic and hazard symbols
appear on the 402 Dilutor Dispenser:
1 Individual components:
parts of the valve, the Tee
junction, and the syringes
(except for the 25 mL syringe)
may be autoclaved after
dismounting (121°C, 0.1 MPa,
20 min).
!
Symbol Explanation
Alternating current
PROTECTIVE CONDUCTOR
TERMINAL
On (Supply switch)
Off (Supply switch)
Caution, risk of electric shock
Caution (refer to User’s Guide)
I
O
~