MITSUBISHI ELECTRIC MR-J2S- CP - Manual (Page 133)

4 - 42
4. OPERATION
1) Open the operation window. (When the model used is the MR-J2S-200CP MR-J2S-350CP or more,
also remove the front cover.)
2) Install the battery in the battery holder.
3) Install the battery connector into CON1 until it clicks.
Battery connector
Battery
Operation window
CON1
Battery holder
CON1
Battery connector
Battery
Battery holder
For MR-J2S-100CP or less
Battery connector
CON1
Battery holder Battery
For MR-J2S-500CP MR-J2S-700CP
For MR-J2S-200CP MR-J2S-350CP
(6) Parameter setting
Set parameter No.2 (Function selection 1) as indicated below to make the absolute position detection
system valid.
Parameter No.2
Selection of absolute position detection system
0: Incremental system
1: Absolute position detection system
1