MITSUBISHI ELECTRIC MR-J2S- CP - Manual (Page 167)

6 - 6
6. MR Configurator (SERVO CONFIGURATION SOFTWARE)
6.5 Point table
Click “Position-Data” on the menu bar and click “Point Tables” on the menu.
When the above choices are made, the following window appears.
a)
f)
b)
d)
h)
e) g)
c)
(1) Point table data write ( a) )
Click the point table data changed and press the “Write” button to write the new point table data to the
servo amplifier.
(2) Point table data verify ( b) )
Click the “Verify” button to verify all data being displayed and the data of the servo amplifier.