MITSUBISHI ELECTRIC MR-J2S- CP - Manual (Page 176)

6 - 15
6. MR Configurator (SERVO CONFIGURATION SOFTWARE)
(1) Servo motor speed setting ( a) )
Enter a new value into the “Motor speed” input field and press the enter key.
(2) Acceleration/deceleration time constant setting ( b) )
Enter a new value into the “Accel/decel time” input field and press the enter key.
(3) Moving distance setting ( c) )
Enter a new value into the “Move distance” input field and press the enter key.
(4) Servo motor start ( d), e) )
Click the “Forward” button to rotate the servo motor in the forward rotation direction.
Click the “Reverse” button to rotate the servo motor in the reverse rotation direction.
(5) Temporary stop of servo motor ( f) )
Click the “Pause” button to stop the servo motor temporarily.
(6) Positioning operation window closing ( g) )
Click the “Close” button to cancel the positioning operation mode and close the window.