MITSUBISHI ELECTRIC MR-J2S- CP - Manual (Page 162)

6 - 1
6. MR Configurator (SERVO CONFIGURATION SOFTWARE)
6. MR Configurator (SERVO CONFIGURATION SOFTWARE)
POINT
Some functions of the MR Configurator (servo configuration software)
may be unavailable for some versions. For details, please contact us.
The MR Configurator (servo configuration software) (MR2JW3-SETUP151E or more) uses the
communication function of the servo amplifier to perform parameter setting changes, graph display, test
operation, etc. on a personal computer.
6.1 Specifications
Item Description
Communication signal Conforms to RS-232C.
Baud rate[bps] 57600, 38400, 19200, 9600
System Station selection
Monitor
Batch display, high-speed display, graph display
Minimum resolution changes with the processing speed of the personal computer.
Alarm Alarm display, alarm history, data display at alarm occurrence
Diagnostic
I/O display, function device display, no-rotation reason display, cumulative power-on time display,
software number display, motor information display, tuning data display, ABS data display, shaft
name setting.
Parameters Parameter setting, list display, change list display, detailed display, turning, device setting.
Test operation Jog operation, positioning operation, motor-less operation, DO forced output, single-step feed.
Advanced function Machine analyzer, gain search, machine simulation.
Position-Data Point Tables
File operation Data read, save, print
Others Station setting, help display
6.2 System configuration
(1) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor.
Model (Note 1) Description
(Note 2)
Personal
computer
IBM PC-AT compatible where the English version of Windows ® 95, Windows ® 98, Windows ® Me, Windows
NT ® Workstation 4.0, Windows ® 2000 Professional, Windows ® XP Professional or Windows ® XP Home
Edition operates
Processor: Pentium ® 133MHz or more (Windows ® 95, Windows ® 98, Windows NT ® Workstation 4.0,
Windows ® 2000 Professional)
Pentium ® 150MHz or more (Windows ® Me)
Pentium ® 300MHz or more (Windows ® XP Professional, Windows ® XP Home Edition)
Memory: 16MB or more (Windows ® 95), 24MB or more (Windows ® 98)
32MB or more (Windows ® Me, Windows NT ® Workstation 4.0, Windows ® 2000 Professional)
128MB or more (Windows ® XP Professional, Windows ® XP Home Edition)
Free hard disk space: 60MB or more
Serial port used
OS
Windows ® 95, Windows ® 98, Windows ® Me, Windows NT ® Workstation 4.0, Windows ® 2000 Professional,
Windows ® XP Professional, Windows ® XP Home Edition (English version)
Display
One whose resolution is 800 600 or more and that can provide a high color (16 bit) display.
Connectable with the above personal computer.
Keyboard Connectable with the above personal computer.
Mouse Connectable with the above personal computer. Note that a serial mouse is not used.
Printer Connectable with the above personal computer.
Communication
cable
MR-CPCATCBL3M
When this cannot be used, refer to section 14.1.4 (3) and fabricate.
Note 1. Windows and Windows NT are the registered trademarks of Microsoft Corporation in the United State and other countries.
Pentium is the registered trademarks of Intel Corporation.
2. On some personal computers, this software may not run properly.