Free play inspection, Throttle cable adjustment, Throttle case removal/disassembly – Kawasaki STX-15F User Manual

Page 119: Throttle lever, cable and case, Throttle case r

Advertising
background image

FUEL SYSTEM (DFI) 3-65

Throttle Lever, Cable and Case

Free Play Inspection

Refer to Throttle Control System Inspection in the Peri-
odic Maintenance chapter.

Throttle Cable Adjustment

Refer to Throttle Cable Adjustment in the Periodic Main-
tenance chapter.

Throttle Case Removal/Disassembly

Unscrew the mounting screws [A] and remove the han-
dlebar pad [B].

Remove the throttle case.

Unscrew the throttle case mounting screws [C] separate
the case halves [D].

Disconnect the throttle cable from the case.

Slide the rubber boots [A] and rubber cap [B] out of the
place.

Unscrew the throttle cable fitting nut [C].

Use a screw driver [A] to separate the tip [B] of the cable
end from the case body.

Advertising