Kawasaki STX-15F - Manual (Page 385)

ELECTRICAL SYSTEM 14-59
Multifunction Meter
Fuel Level Gauge/Symbol/FUEL Characters/Warning
Light Inspection
•
Connect the 12 V battery and terminals in the same man-
ner as specified in the “Display Function Inspection”.
•
Connect the variable rheostat [A] to the terminal [5] as
shown.
JT1500-A2 model ∼ [B]
JT1500-A1 model [C]
•
Check that the number of segments matches the resis-
tance value of the variable rheostat.
Resistance Value (Ω) Display Segments
8030 0*
2930 1 ∼ 2
1330 3 ∼ 4
510 5 ∼ 6
0 7 ∼ 8
*: The LED warning light, fuel symbol and FUEL char-
acters flash at the same time.
•
If any display function does not work, replace the meter
assembly.
Speedometer Inspection
•
Connect the 12 V battery and terminals in the same man-
ner as specified in the “Display Function Inspection”.
•
The speed equivalent to the input frequency is indicated in
the oscillator [A] if the square wave (illustrated as shown)
would be input into the terminal [8].
JT1500-A2 model ∼ [B]
JT1500-A1 model [C]
○
Indicates approximately 60 mph in case the input fre-
quency would be approximately 265 Hz.
○
Indicates approximately 60 km/h in case the input fre-
quency would be approximately 165 Hz.