Kawasaki STX-15F - Manual (Page 31)

PERIODIC MAINTENANCE 2-7
Torque and Locking Agent
Torque
Fastener
N·m kgf·m ft·lb
Remarks
Starter Relay Mounting Nut 3.5 ∼ 4.5 0.35 ∼ 0.45 30 ∼ 40 in·lb
Starter Cable Mounting Nut 3.5 ∼ 4.5 0.35 ∼ 0.45 30 ∼ 40 in·lb
Timing Rotor Bolt 20 2.0 14 L
Crankshaft Sensor Screws 4.4 0.45 39 in·lb L
Rubber Grommet Holder Screws 4.4 0.45 39 in·lb L
Crankshaft Sensor Cover Bolts 7.8 0.80 69 in·lb
Oil Temperature Sensor 15 1.5 11 see text
Camshaft Position Sensor Bolt 9.8 1.0 87 in·lb L
Spark Plugs 13 1.3 113 in·lb
Regulator/rectifier Bolts 7.8 0.80 69 in·lb
Replay Assembly Bolts 2.5 0.25 22 in·lb L
ECU Mounting Bolts 8.8 0.90 78 in·lb L
Main Fuse Mounting Bracket Bolt 7.8 0.80 69 in·lb
Multifunction Meter Mounting Bolts 3.9 0.40 35 in·lb L
Fuel Level Sensor Clamp Screw 2.9 0.30 26 in·lb
Start/stop Switch Case Mounting Screws 3.9 0.40 35 in·lb
Speed Sensor Mounting Bolts 3.9 0.40 35 in·lb L
Starter Motor Through Bolts 6.4 0.65 56 in·lb L, R
Starter Motor Mounting Bolts 8.8 0.90 78 in·lb L
Starter Motor Ground Bolt 7.8 0.80 69 in·lb
Starter Motor Terminal Nut 7.8 0.80 69 in·lb
Stator Coil Bolts 12 1.2 104 in·lb L
Grommet Holder Bolts 8.8 0.90 78 in·lb L
The next table, relating tightening torque to thread diameter, lists the basic torque for the bolts and
nuts. Use this table for only the bolts and nuts which do not require a specific torque value. All of the
values are for use with dry solvent-cleaned threads.
General Fasteners (stainless bolt and nut)
Torque
Threads dia. (mm)
N·m kgf·m ft·lb
6 5.9 ∼ 8.8 0.60 ∼ 0.90 52 ∼ 78 in·lb
8 16 ∼ 22 1.6 ∼ 2.2 12 ∼ 16
10 30 ∼ 41 3.1 ∼ 4.2 22 ∼ 30