Kawasaki STX-15F - Manual (Page 128)

3-74 FUEL SYSTEM (DFI)
Throttle Body Assy
ISC Resistance Inspection
•
Remove:
Air Filter (from the throttle body assy)
ISC Connector [A] (disconnect)
•
Measure the ISC resistance with the hand tester.
Special Tool - Kawasaki Hand Tester: 57001-1394
ISC [A]
Rotor [B]
ISC Resistance
Connection: 1-2, 2-3, 4-5, 5-6 terminals
Standard: about 30 Ω (at 20°C)
Connection: 1-3, 4-6 terminals
Standard: about 60 Ω (at 20°C)
If the reading is out of the specified value, replace the
steeping motor.