Kawasaki STX-15F - Manual (Page 167)

ENGINE LUBRICATION SYSTEM 4-23
Oil Pressure Switch
Oil Pressure Switch Removal
•
Remove:
Seat (see Hull/Engine Hood chapter)
Inlet Manifold (see Fuel System (DFI) chapter)
•
Disconnect:
Switch Connector [A]
•
Place a rag or cloth under the oil pressure switch [A] and
remove the oil pressure switch.
○
Do not damage the connect part [B] of the switch.
Oil Pressure Switch Installation
•
Apply silicone sealant to the threads of the oil pressure
switch and tighten it.
Sealant - Kawasaki Bond (Silicone Sealant): 56019-120
Torque - Oil Pressure Switch: 15 N·m (1.5 kgf·m, 11 ft·lb)
•
Connect the switch connector.
•
Install the removed parts.