Kawasaki STX-15F - Manual (Page 144)

3-90 FUEL SYSTEM (DFI)
Fuel Tank
Fuel Filler and Tube Removal
•
Open the front storage compartment cover.
•
Loosen the fuel filler tube clamp screws [A] and remove
the fuel filler tube [B].
•
Remove the fuel filler cap [A].
•
Take out the screws [B] in the filler flange and remove the
fuel filler [C].
Fuel Filler and Tube Installation
•
Clean the deck and filler on their mating surfaces with
greaseless, high-flash point solvent.
WARNING
Clean the parts in a well-ventilated area, and take
ample care that there are no sparks or flame any-
where near the working area; this includes any ap-
pliance with a pilot light. Do not use gasoline or a
low-flash point solvent. A fire or explosion could
result.
•
Replace the fuel filler gasket [A] with a new one.
•
Visually inspect the fuel filler cap gasket [B] for damage.
If there is any doubt as to the condition of the fuel filler
gasket, replace the gasket with a new one.
•
Tighten the fuel filler tube clamp screws.
Torque - Fuel Filler Tube Clamp Screws: 2.9 N·m (0.30
kgf·m, 26 in·lb)