Kawasaki STX-15F - Manual (Page 333)

ELECTRICAL SYSTEM 14-7
Exploded View
Torque
No. Fastener
N·m kgf·m ft·lb
Remarks
1 Vehicle-down Sensor Mounting Screws 1.5 0.15 13 in·lb
2 Electrical Parts Bracket Screws 4.9 0.50 43 in·lb L
3 Starter Relay Case Bolts 7.8 0.80 69 in·lb
4 Ignition Coil Mounting Bolts 8.8 0.90 78 in·lb L
5 Water Temperature Sensor 15 1.5 11 see text
6 Starter Relay Mounting Nuts 3.5 ∼ 4.5 0.35 ∼ 0.45 30 ∼ 40 in·lb
7 Starter Cable Mounting Nuts 3.5 ∼ 4.5 0.35 ∼ 0.45 30 ∼ 40 in·lb
8 Timing Rotor Bolt 20 2.0 14 L
9 Crankshaft Sensor Screws 4.4 0.45 39 in·lb L
10 Rubber Grommet Holder Screws 4.4 0.45 39 in·lb L
11 Crankshaft Sensor Cover Bolts 7.8 0.80 69 in·lb
12 Oil Temperature Sensor 15 1.5 11 see text
13 Camshaft Position Sensor Bolt 9.8 1.0 87 in·lb L
14 Spark Plugs 13 1.3 113 in·lb
15 Regulator/Rectifier Bolts 7.8 0.80 69 in·lb
16 Relay Assembly Bolts 2.5 0.25 22 in·lb L
17 ECU Mounting Bolts 8.8 0.90 78 in·lb L
18 Main Fuse Mounting Bracket Bolt 7.8 0.80 69 in·lb
EO: Fill the hollow of the exhaust manifold with engine oil (10W-30).
G: Apply grease.
L: Apply a non-permanent locking agent.
Si: Fill the hollow of the oil pan with the specified silicone grease (Kawasaki Bond: 92137-1002).
WG: Apply water resistant grease.