Kawasaki STX-15F - Manual (Page 405)

APPENDIX 16-3
Cable, Wire and Hose Routing
1. Crossmember
2. Cylinder Head Cover
3. Throttle Cable
4. Delivery Pipe
5. Fix the throttle cable to the delivery pipe with the band.
6. Inlet Manifold
7. Horizontal Plane
8. Position the clamp pinch head below the horizontal plane.
9. Throttle Body Assy
10. Air Filter
11. Clamp
12. Cooling Hose (Cylinder ∼ Left Water Box Muffler)
13. Oil Pan
14. Position the clamp pinch head as shown.
15. Oil Separator Tank Hose (Tank
∼ Oil Pan)
16. Cooling Hose (Pump ∼ Output Cover)
17. Output Cover
18. Exhaust Pipe
19. Cooling Hose (Output Cover
∼ Exhaust Pipe)
20. Band
21. Oil Separator Tank
22. Cooling Hose (Left Water Box Muffler
∼ Cylinder)
23. Return Oil Hose (Cylinder ∼ Oil Pan)
24. Air Filter Drain Cap
25. White Mark
26. Oil Separator Tank Hose (Tank
∼ Air Filter)
27. Deck (Port Side)
28. Oil Separator Tank Hose (Cylinder Head Cover
∼ Tank)
29. Plate
30. Air Suction Valve Hose
31. Exhaust Manifold
32. Flushing Hose
33. Bypass Outlet Hose
34. Breather Hose (Cylinder Head
∼ Breather Case)
35. Run the flushing hose under the crossmember. Fix the flushing hose with the band at the left
end hole so that the hose does not touch the crossmember.
36. Flushing Cap