Kawasaki STX-15F - Manual (Page 279)

PUMP AND IMPELLER 11-9
Pump and Impeller
•
Be sure the seals [A] on the hull are in the position.
○
Coat the outside edge [A] of the seal [B] with silicone
sealant to form a seal between the hull and seal.
•
Install the pump cover.
○
Be sure the seal [A] is in the position.
○
Apply a non-prmanent locking agent to the pump cover
mounting bolts and torque them.
Torque - Pump Cover Mounting Bolts: 7.8 N·m (0.80 kgf·m,
69 in·lb)
Pump Disassembly
•
Unscrew the steering nozzle pivot bolts [A], and remove
the steering nozzle [B].
•
Unscrew the pump outlet mounting bolts [A], and remove
the pump outlet [B].