Parker Hannifin Dynaserv G2 - Manual (Page 104)

8-12
DrvGII PC Utility
8
(3) Axis signal status display
In the “Terminal” menu, click “Axis signal status (A)” under “Monitor” to display the “Axis signal status”
dialog box (see Figure 8.12).
Via the “Axis signal status” dialog box, it is possible to monitor the axis status, etc. of the driver.
Figure 8.12 “Axis signal status” dialog box
(4) Error or alarm monitor
In the “Terminal,” click “Error or Alarm (S)” under “Monitor” to display the “Error or Alarm” dialog box (see
figure 8.13).
When an error occurs, this dialog box displays “error message” and shows the error history in the display text
area. When an alarm occurs, it displays “alarm message” and shows the alarm history in the display text area. In
the display text area, the error history is displayed first, and a maximum of 16 errors/alarms is displayed.
Figure 8.13 “Error or Alarm” dialog box
Error message
Display text area
Alarm message
Green: on
Red: off
Gray: nonexistent signal