Parker Hannifin Dynaserv G2 - Manual (Page 122)

8-30
DrvGII PC Utility
8
8.6.3 Pulse Set
(1) Pulse setting
1) Click “Puls Config (P)” in the “Main Menu” dialog box.
2) The “Puls configuration” dialog box is displayed and the current setting status is read.
Figure 8.28 “Puls configuration” dialog box
3) Select the parameter from the combobox.
4) Click “Set (S)” to start downloading the selected parameter to the driver.
5) When the downloading is finished, follow the message and reset the driver.