Parker Hannifin Dynaserv G2 - Manual (Page 49)

4-14
Basic Settings for Operating the Motor
4
4.6 Auto-tuning
The auto-tuning can be performed according to the following procedure.
(1) Checking the rotation direction
Check the rotation direction (CW/CCW) of the motor.
CW CCW
Load
installation
surface
Caution
Look carefully from both sides of the load installation surface to check the CW/CCW
movement. When started, the motor operates in the CCW direction. Take extra care to
ensure that there is no mechanical interference with the rotor, which is currently in the
stop position.
(2) Click the “Servo Cntl (S)” button on the “MainMenu.”
! !! !
Click the Servo Cntl
button