Parker Hannifin Dynaserv G2 User Manual
Page 187
Error number
60
Cannot interpret
Error type:
[KIND_ERRALM2] Error/operation alarm
Measures:
[TYPE_E2] Stop deceleration.
Long:
Short:
CantInterpret
CantIntp
Main cause:
The command cannot be interpreted.
Action to take:
Error number
61
Command format error
Error type:
[KIND_ERRALM2] Error/operation alarm
Measures:
[TYPE_E2] Stop deceleration.
Long:
Short:
FormatError
FormatErr
Main cause:
A command format error occurred.
Action to take:
Error number
62
Data is out of range
Error type:
[KIND_ERRALM2] Error/operation alarm
Measures:
[TYPE_E2] Stop deceleration.
Long:
Short:
Out_ofRange
OutOfRange
Main cause:
The data is out of range.
Action to take:
Error number
63
Operation error
Error type:
[KIND_ALM] Operation alarm
Measures:
[TYPE_E2] Stop deceleration.
Long:
Short:
OperationError
OperateErr
Main cause:
An operation error occurred.
[Subcode]
1: Prohibited operation in machine setting mode
2: Prohibited operation while holding an operation
Action to take:
Error number
65
Illegal parameter and monitor number
Error type:
[KIND_ERRALM2] Error/operation alarm
Measures:
[TYPE_E2] Stop deceleration.
Long:
Short:
IllegalNo
IllegalNo
Main cause:
The parameter and monitor of a non-existent number was specified.
Action to take: