Parker Hannifin Dynaserv G2 - Manual (Page 172)

Monitor detail STD1
300 Currently under operation
Unit: None
Indicates that an operation is being performed.
301 Axis is under operation
Unit: None
Indicates that an axis operation is being performed.
302 Error status
Unit: None
Indicates the error status.
303 Alarm status
Unit: None
Indicates the alarm status.
304 Driver ready
Unit: None
Indicates that the driver is ready.
305 Servo ready
Unit: None
Indicates that the servo is ready.
310 Display of program number under execution
Unit: None
Indicates the program number during execution or after execution.
317 Completion of homing status display
Unit: None
Indicates whether a homing operation has been completed after the power is turned on.
318 Homing operation: The measured value
Unit: pulse
Indicates the distance between the neighboring signal and origin that is measured during homing operation.