Parker Hannifin Dynaserv G2 - Manual (Page 178)

390 Motor linear coordinate command differential value
Unit: pulse/ ∆T
Displays the differential value of the motor linear coordinate command value. (2msec sample)
391 Present motor linear coordinate differential value
Unit: pulse/ ∆T
Displays the differential value of the present motor linear coordinate value. (2msec sample)
392 Pre-filter current square duty
Unit: digit
Displays the pre-filter current square duty (decimal point 15 bits).
393 Post-filter current square duty
Unit: digit
Displays the post-filter current square duty (decimal point 15 bits)
396 Driver code
Unit: None
Displays the driver code.
398 Motor code
Unit: None
Displays the motor code.
399 Time after power ON [msec]
Unit: msec
Indicates the time after the power has been turned on.