Error messages/other messages, Error messages, Other messages – Roland RD-700 User Manual
Page 103
103
Appendices
Error Messages/Other Messages
Error messages
Indication:
MIDI Buffer Full
Situation:
Due to an inordinate volume of MIDI
messages received, the RD-700 has failed to
process them properly.
Action:
Reduce the amount of MIDI messages to be
transmitted.
Indication:
MIDI Communication Error
Situation:
A problem has occurred with the MIDI cable
connections.
Action:
Check that MIDI cables are not broken or
pulled out.
Indication:
BULK DUMP: Receive Data Error
Situation:
A MIDI message was received incorrectly.
Action:
If the same error message is displayed
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the RD-
700.
Indication:
BULK DUMP: Check Sum Error
Situation:
There is a problem with the System Exclusive
message’s Check Sum.
Action:
Check the value of the Check Sum.
Other Messages
Indication:
Now, Transmitting System Exclusive.
Situation:
Indicated when a Data Request message (RQ1)
is received.
Action:
The RD-700 outputs the requested data while
this message continues to be displayed.
Indication:
Now, writing Bulk Dump Data. Keep on
POWER!!
Situation:
Indicated when Bulk Dump data is being
received.
Action:
Once received, the data is written to the RD-
700’s internal memory; be absolutely sure not
to turn off the power until “COMPLETED”
appears in the display.
Indication:
Unavailable while in Rec Mode
Situation:
This is displayed when the [MIDI TX] button is
pressed with Rec Mode “ON.”
Action:
When Rec Mode is “ON,” you cannot change
the MIDI TX settings. To make changes to the
MIDI TX settings, set Rec Mode to “OFF” (p.
97).
RD-700_e.book 103 ページ 2003年10月23日 木曜日 午後4時59分