Roland RD-700 - Manual (Page 13)

13
Panel Descriptions
9 DISPLAY
This shows the Tone names and the values of various
settings, etc (p. 32).
10 CURSOR [ ], [ ], [ ], [ ]
Press these to switch pages and to move the cursor (p. 33).
11 [DEC/NO], [INC/YES]/[ENTER]
This is used to modify values.
If you keep on holding down one button while pressing the
other, the value change accelerates.
Use “ENTER” to finalize a value or execute an operation.
12 PART SELECT buttons
Selects the part for which the tone is to be selected (p. 44).
13 EXPANSION [A], [B]
This selects a sound from a wave expansion board, sold
separately (p. 39).
14 FUNCTION
[EDIT]
Press this button when you wish to adjust various settings
(p. 68).
[WRITE]
Stores the current settings to “Setup” (p. 56).
[MIDI TX]
Puts the RD-700 in control of the external MIDI sound
generator (p. 59).
[NUM LOCK]
You can input numerical values with the TONE SELECT
buttons when this button is lit (p. 37).
In addition, you can listen to the demo songs by
simultaneously pressing this button and [WRITE] (DEMO
PLAY) (p. 34).
15 TONE SELECT buttons
Pressed to select tones (p. 36).
You can also input numerical values with these buttons
when the [NUM LOCK] button is on. [NUM LOCK] turns on
automatically in the Edit and other screens, enabling input of
numerical values with the buttons.
Pitch Bend/Modulation Lever
This allows you to control pitch bend or apply vibrato (p. 48).
10
11 15
12 13 14
RD-700_e.book 13 ページ ２００３年１０月２３日 木曜日 午後４時５９分