Roland RD-700 - Manual (Page 43)

43
Performing with the Keyboard
Performing
Playing Different Tones in Two Different Sections of
the Keyboard ([SPLIT])
Such a division of the keyboard into right- and left-hand sections is called a
“Split,” and the key where the division takes place is called the “Split
Point.”The split-point key is included in the UPPER section.
The Split Point has been set at the factory to “C4.”
fig.panel
1
Press [SPLIT], getting the indicator to light.
PART SWITCH [LOWER] lights.
Try fingering the keyboard.
fig.LCD
The UPPER tone plays in the right-hand section of the keyboard, and the
LOWER tone plays in the left-hand section.
fig.LCD
2
To exit Split mode, press [SPLIT] once more, and the indicator
light goes out.
Selecting Both Layer and Split Mode
When both [LAYER] and [SPLIT] are on, the LOWER Tone is played at the
left side of the Split Point, while the UPPER1 and UPPER2 Tones are layered
to the right of the Split Point.
You can change the split
point.
Please refer to “Changing
the Keyboard’s Split
Point” (p. 44).
CONTROL
1,2
Split Point (C4)
UPPER LOWER
RD-700_e.book 43 ページ ２００３年１０月２３日 木曜日 午後４時５９分