Roland RD-700 - Manual (Page 38)

38
Performing with the Keyboard
Performing
Playing a Rhythm Set
Among the tones that can be selected with the TONE SELECT buttons are
Rhythm Sets, which are collections of a variety of percussion instrument
sounds and special sound effects. Here’s how to select a Rhythm Set and
play percussion sounds.
fig.panel
1
Press ONE TOUCH [PIANO].
This selects a single tone to be played over the entire keyboard.
2
Press TONE SELECT [RHY/GM2].
If [NUM LOCK] is turned on at this time, the Rhythm Set Category cannot
be selected. Turn [NUM LOCK] off.
3
Press different keys to play different percussion instruments.
4
To select a different Rhythm Set, press [INC/YES] or [DEC/
NO].
CONTROL
2 1 4
Tones selected with [RHY/
GM2] are registered in the
following order: “Rhythm
Sets,” “GM2 Rhythm Sets,”
and “GM2 Tones.” Refer to
the “Tone List” (p. 135).
The combination of sounds
assigned to the keyboard
varies according to the
Rhythm set. Refer to
“Rhythm Set List”
(p.
138).
RD-700_e.book 38 ページ ２００３年１０月２３日 木曜日 午後４時５９分